{"version":1,"source":"https://memefees.com","scope":"Published platform facts, reviews and referral guides. Live figures are available through /api/v1/catalog. Editorial dates are preserved from the original records.","terms":"https://memefees.com/methodology#data-license","count":1,"documents":[{"id":"review:pons","kind":"review","slug":"pons","title":"Pons review","url":"https://memefees.com/reviews/pons","updatedAt":"2026-10-17","sources":[{"label":"Pons V1 documentation","url":"https://docs.ponsfamily.com"},{"label":"Pons V2 documentation and availability","url":"https://docs.ponsfamily.com/v2"}],"markdown":"A token launchpad on Robinhood Chain with two versions: V1 locked pools and V2 launch curves. We checked its fees, audit status and safety rules against both sets of Pons docs and DefiLlama on 17 October 2026.\n\n### Verdict\n\nPons is a token launchpad on Robinhood Chain. A V1 token trades in a locked Uniswap V3 pool with a 1% fee from the first block, so a $1,000 trade pays $10.00, and $7.00 of it goes to the creator on current tokens. A V1 launch costs 0.0005 ETH. V2 starts each token on a bonding curve and graduates it into a locked Uniswap v4 pool.\n\nUse V1 if you want a simple, documented fee and liquidity that nobody can pull. Wait on V2 if you need audited contracts: the V2 docs say that no audit has closed and that only approved addresses can launch. Pons has no referral program, so every trader pays the same fee.\n\n### Pros\n\n- V1 tokens trade in a locked pool immediately, without a curve to fill or a migration step\n- The V1 fee terms are short and public: 0.0005 ETH to launch, 1% per trade, 70% to the creator\n- 80% of V1 protocol fees buy PONS and send it to the burn address, per the V1 docs\n- Both versions publish contract addresses, events and a risk disclosure in their docs\n- V2 snipe protection taxes early buys from 99% down to zero over the first 5 seconds, and sells are never taxed\n\n### Cons\n\n- No audit has closed for V2, and DefiLlama lists 0 audits for Pons V1 and V2\n- Public V2 launches are closed: only whitelisted addresses can create a token\n- The V2 docs publish no standard trading fee rate. You read it from each curve or from the trade quote\n- Pons has no referral program, so no code lowers its fees\n- DefiLlama's Pons volume covers V2 curve swaps only, so it understates total trading\n\n### Best for\n\n- Traders on Robinhood Chain who want a flat 1% fee and locked liquidity from the first block\n- Creators who want 70% of the pool fee on V1, more than the 50% that the current NOXA site gives\n- Creators who want a curve launch paired with an approved asset other than ETH, once V2 opens to the public\n\n### Skip it if\n\n- You require completed, published audit reports. Pons V2 lists three reviews in progress and none closed\n- You need operating history from before July 2026\n- You want a referral discount. Pons has no referral program\n\n### What is Pons?\n\nPons is a token launchpad on Robinhood Chain, chain ID 4663. Its site is ponsfamily.com, and DefiLlama lists @ponsdotfamily as its X account. Pons runs two products. V1 creates a token and a locked trading pool in one transaction. V2 starts a token on a bonding curve and moves it into a locked Uniswap v4 pool when the curve sells out.\n\nThe V1 factory that launches tokens today started at block 8,991,118 on 13 July 2026. An older V1 factory started earlier the same day. Tokens from the older factory keep their original fee split. The V2 docs say that the V1 protocol continues to operate.\n\nPons is one of several launchpads on the chain. Our [Robinhood Chain page](https://memefees.com/chains/robinhood) compares them, and the [Pons stats page](https://memefees.com/launchpads/pons) shows its fees and launch counts.\n\n### Is Pons safe?\n\nPons V1 has public contracts and locked liquidity, but no published audit. V2 is unaudited by its own description. The V2 docs say that three teams are reviewing the code: SB Security, Dingbats and Pashov Audit Group. They also say: \"No audit has closed. Treat v2 as unaudited until the reports are published here.\" DefiLlama lists 0 audits for both Pons products on 17 October 2026.\n\nPons does not hold your funds. You trade from your own wallet, and the V2 docs state that Pons does not provide custody, warranties or financial advice. V2 fees go into an escrow, and each receiver withdraws them when it chooses.\n\nLiquidity in both versions stays locked. The V1 docs say that the pool's liquidity is locked automatically. The V2 docs say that there is no unlock button and no privileged wallet that can reach the locked position. The owner can still edit or disable a V2 launch config, and Pons can return the collected funds if a launch is stuck before graduation for seven full days.\n\nBoth versions limit early buyers. In V1, only the creator's first buy can run on the launch block. In the next block, each wallet can hold at most 5% of supply and buy at most 5.5%. Selling and transfers are never restricted. In V2, a snipe tax starts at 99% of a buy and falls to zero over the first 5 seconds. Sells never pay it.\n\nThe tokens carry most of the risk. The V1 docs call them user-created and experimental, and say that displayed values are estimates. A V1 graduation only confirms that the pool reached its threshold. Read our [memecoin survival study](https://memefees.com/research/memecoin-survival-2026) before you buy a new token.\n\n### Pons V1: no curve, locked pools from block one\n\nA V1 launch mints a fixed supply of one billion tokens and opens a Uniswap V3 pool against WETH with a 1% fee in the same transaction. The pool's liquidity is locked at once. There is no bonding curve to fill and no migration step.\n\nPons labels 4.2 ETH of WETH in the pool as graduation by default. The label does not change where the token trades. A V1 token stays in the same pool before and after the milestone, at the same 1% fee. Compare this with a curve launchpad in our guide to [memecoin graduation](https://memefees.com/learn/memecoin-graduation).\n\n### Pons V2: a launch curve into Uniswap v4\n\nA V2 curve holds the whole supply from the moment the launch is created. A fixed share is kept for the pool, and the curve sells the rest. Each launch config sets its own values, so the docs give no fixed percentage. The graduation target is set in the launch's pairing asset. The 4.2 ETH V1 milestone is therefore not a V2 threshold.\n\nOnly assets that Pons has approved can be used for pairing, and native ETH is the default. Trades and creator payouts use that asset, never the launch token. The buy that completes the curve creates a full-range Uniswap v4 pool with the Pons hook, and the liquidity is locked for good.\n\nA creator can buy back the token with part of the creator share. Tokens bought back are locked and not burned. They vest over five years, split between the creator and Pons. A community takeover of an abandoned token waits three days, and Pons can call it off during the wait.\n\n### Pons fees\n\nA Pons V1 trade pays the 1% pool fee, and a V1 launch costs 0.0005 ETH. For tokens from the current factory, 70% of the pool fee goes to the creator and 30% to Pons. Tokens from the older factory keep a 90% creator and 10% Pons split. Pons says that 80% of its V1 protocol fees buy PONS through an automated TWAP and send it to the burn address. The other 20% pays for infrastructure and the team.\n\nDefiLlama's fee methodology for Pons V1 adds one more detail: since 27 July 2026, one-sixth of swap fees is routed to Uniswap. The Pons docs do not mention that share. If it applies to your token, the creator and Pons each receive a little less than the 70/30 figures below. The fee you pay stays 1%.\n\nV2 has a standard trading fee on every launch, and each token can add a creator tax. Pons takes its share of the standard fee first. The docs publish no standard rate. You read it as feeBps on each curve, or from the trade quote. The creator tax has a cap, and a creator cannot raise the tax after launch. The V2 docs say that you pay the same rate on the curve and in the Uniswap pool. The V2 launch fee is set in the contract and has no published amount.\n\nNetwork fees on Robinhood Chain are extra and paid in ETH. In a thin pool, price impact can cost more than the fee, so check the quote first. Read [how creator fees work](https://memefees.com/learn/creator-fees) to compare the 70% creator share with other launchpads.\n\nOur Pons fee figures combine the DefiLlama Pons V1 and V2 adapters. The volume figure covers V2 launch-curve swaps only. It leaves out V1 pools and swaps in external Uniswap v4 pools, so it understates total Pons trading.\n\n### Worked example: a $100 and a $1,000 trade\n\nA $100 buy of a current V1 token pays $1.00 in pool fees. The creator gets $0.70 and Pons gets $0.30, and $0.24 of the Pons share buys PONS to burn. A $1,000 buy pays $10.00: $7.00 to the creator and $3.00 to Pons, of which $2.40 goes to the buyback. A sell of the same size pays the same fee. A $100 round trip therefore costs about $2.00 in pool fees before gas and price impact.\n\nOn a token from the older V1 factory, the same $1,000 buy also pays $10.00, but the creator gets $9.00 and Pons gets $1.00. The trader pays the same in both cases.\n\nA V2 trade has no fixed example, because the standard rate and the creator tax change from token to token. Timing matters more than the rate in the first seconds: a buy placed one second after launch can lose most of its value to the snipe tax. Wait until the snipe tax has fallen to zero, then read the full fee in the quote.\n\n### Who should use Pons?\n\nPons V1 suits traders and creators on Robinhood Chain who want the simplest fee model: one 1% fee, locked liquidity and no migration. Creators get a larger share of each trade on V1 than on the current NOXA site. The 0.0005 ETH launch fee is small, and the docs list every contract address, so you can check a token before you buy.\n\nPons V2 suits creators who want a curve launch, a pairing asset other than ETH or a creator tax. For now, only whitelisted addresses can launch on V2, and the code is under audit. Traders who need audited code should stay with V1 tokens or wait for the V2 reports. Pons is a poor fit if you want to trade on Solana or BSC, because it runs only on Robinhood Chain.\n\n### Pons vs NOXA and pump.fun\n\nNOXA Fun is the closest alternative to Pons V1. Both put a new token straight into a locked Uniswap V3 pool with a 1% fee on Robinhood Chain, so a $1,000 trade costs $10.00 on both. The differences are in the split and the launch fee. The current NOXA site pays the creator 50% and charges no launch fee. Pons V1 pays the creator 70% and charges 0.0005 ETH. NOXA has had an unclear operator since July 2026, while Pons publishes its contract addresses in its docs. See [Pons vs NOXA](https://memefees.com/vs/pons-vs-noxa) for live data.\n\npump.fun is the larger curve launchpad, and it runs on Solana. In the pump.fun web app or mobile app, a bonding-curve trade costs 1.70%, or $17.00 on $1,000, because of a Platform Fee added on 17 October 2026. Through pump.fun Terminal or another app, the pump.fun fee is 1.25%, or $12.50 on $1,000, plus the fee that the app charges. A Pons V1 trade costs $10.00 on the same size. The chains differ, so compare the gas, the wallet you use and the buyers on each chain as well. See pump.fun vs Pons for the live numbers.\n\nPools and LetsCash also launch on Robinhood Chain. Pons vs Pools and Pons vs LetsCash compare their fee models, and the fee table below lists the terms of each.\n\n### Pons referral code\n\nPons has no referral program. Its documentation covers creator fees and launch costs only, and MemeFees holds no Pons code. If you see a Pons referral or discount code elsewhere, treat it as unverified.\n\n### Pons fee table\n\n| Cost | Amount | Note |\n| --- | --- | --- |\n| V1 token launch | 0.0005 ETH | Gas on Robinhood Chain is extra. |\n| V1 trading fee | 1% of each buy and sell | Uniswap V3 pool against WETH. The same fee applies before and after the 4.2 ETH milestone. |\n| V1 fee split | 70% creator, 30% Pons | Current factory. Tokens from the older factory keep 90% creator, 10% Pons. |\n| V1 protocol fees | 80% buy and burn PONS | The other 20% pays for infrastructure and the team. |\n| V2 trading fee | Standard fee plus optional creator tax | No published standard rate. The same rate applies on the curve and in the Uniswap v4 pool. |\n| V2 snipe tax | 99% falling to 0 in 5 seconds | Buys only. Sells never pay it. |\n| Example V1 trades | $1.00 on $100, $10.00 on $1,000 | Pool fee only. Gas and price impact are extra. |\n\nSources: Pons V1 docs (docs.ponsfamily.com), Pons V2 docs (docs.ponsfamily.com/v2, including the audit, snipe protection, fees and safety sections) and DefiLlama protocol data and fee methodology for pons-v1 and pons-v2. All checked on 17 October 2026.\n\n### Frequently asked questions\n\n### Is Pons safe?\n\nPons locks the liquidity of every pool, and you trade from your own wallet. No audit is published: the V2 docs say three reviews are in progress and none has closed. The tokens are user-created and can lose all their value.\n\n### Is Pons legit?\n\nPons is a working launchpad on Robinhood Chain with public docs, contract addresses and fee data on DefiLlama. It started in July 2026, so it has a short history.\n\n### What are the Pons fees?\n\nA V1 trade pays a 1% pool fee: $1.00 on $100 and $10.00 on $1,000. A V1 launch costs 0.0005 ETH. On current V1 tokens, 70% of the pool fee goes to the creator and 30% to Pons. V2 uses a per-token standard fee plus any creator tax.\n\n### Does Pons have a bonding curve?\n\nV1 trades directly in a locked pool. V2 starts with a bonding curve and then creates a locked Uniswap v4 pool.\n\n### What does graduation mean on Pons?\n\nV1 uses a default 4.2 ETH milestone and keeps trading in the same pool. V2 graduates when its curve sells out, and the liquidity moves into a locked Uniswap v4 pool paired with the launch's asset.\n\n### Can anyone launch on Pons V2?\n\nNot yet. The V2 docs say public launches are closed and only whitelisted addresses can create a token. V1 launches stay open.\n\n### Is Pons cheaper than pump.fun?\n\nPer trade, yes. A Pons V1 trade costs 1%. A pump.fun curve trade costs 1.70% in the pump.fun app. Through pump.fun Terminal or another app, the pump.fun fee is 1.25%, plus the fee that the app charges. The two run on different chains.\n\n### Does Pons have a referral program?\n\nNo. Pons has no referral program. Its documentation covers creator fees and launch costs only.","markdownUrl":"https://memefees.com/reviews/pons.md"}]}